The Swadro TC1000 is a new addition to the Swadro TC range and is the largest twin rotor rake in the range. The TC1000 has an adjustable work width of 8.9m – 10.0m and has a heavier design with a redesigned beam for better strength and stability. With demand increasing in rakes these size, the TC1000 is the perfect rake for professional farming.
|Krone rakes excel with their well shaped windrow formation. This ensures that the following harvesting equipment can increase forward speed and productivity as well as produce the perfect product for example well shaped round or square bales.
|Customers tell us our rakes are the cleanest in the field. Our tines are pointing forwards which means when the tine loads up the distance to the ground decreases, to put all that valuable crop into the windrow rather than leaving it behind.
|The cam track inside of our rotor is dry and does not require any lubrication. We offer 3 years warranty for the cam track for absolute peace of mind and to be honest we never had a warranty claim yet.
|Knowing that rotary rakes do not require a lot of tractor PTO horsepower, the engineers have reduced the PTO speed requirement to 350rpm to 450rpm. This will save you fuel and reduces noise, as your tractor runs slower compared to 540PTO speed.
|Tyres on the rear axle of the new Swadro TC1000 are very wide 15.0/55-17 10 PR.
|Standard for the SwadroTC1000 is a hydraulic cylinder to adjust the work and swath width from the cab. The high clearance frame and high rotor lift out allow the rakes to travel over massive windrows without disturbing them.