Extra Large
Accurate spreading in irregular shaped fields.
The DSX-W GEOSPREAD is equipped with two actuators on each dosing unit. One of these actuators controls the setting of the discharge point of the dosing cup onto the disc (letter setting), the other controls the application rate. The GEOSPREAD system makes it possible to adjust the letter setting individually for both discs electrically from the tractor cab. This means the working width can be easily adjusted quickly and accurately just by touching the ISOBUS terminal!
Models | DSX-W (GEOspread) |
Hopper capacity L | 1,500 - 2,150 - 2,800 - 3,450 |
Spread width (m) | 12-54 ▲1 |
Output (kg/min) | 10-320 |
Filling height (cm) | 110 - 129 - 148 - 167 |
Width (cm) | 275 / 290 |
Filling width (cm) | 269 / 284 |
Empty weight (kg) | 640 - 670 - 700 - 730 |
Manual control | - |
Hydraulic control | - |
Comfort Control II | - |
IsoMatch Tellus GO | ❍ |
IsoMatch Tellus | ❍ |
PTO overload clutch | ● |
Hopper sieves | ● |
Agitator | - |
Slow rotating agitator | ● |
Fine application | ● |
Granule size box | ● |
Warning triangle | ❍ |
Reflector decals | ● |
LED light set | ● |
Topdressing kit | - |
Tramline and topdressing kit | - |
Border spreading plat | ❍ |
Hydraulic border spreading plate | ❍ |
TrimFlow border spreading system | ❍ |
Kit to spread 20/21m | - |
Kit to spread 27/28m | - |
Kit to spread 27/30m | - |
Heavy duty vanes (L=285 mm) | ❍ |
Lift vanes (L=330 mm) | ❍ |
Calibration container | ❍ |
Hopper emptying kit | ❍ |
Hopper cover | ❍ |
Ladder | ❍ |
Side step | ❍ |
Mudguards | ❍ |
Storage frame with parking wheels | ❍ |
1 or 2 d.a. valve (separate closing L/R) | - |
Hydraulic drive | ❍ |