Kubota Spreading equipment – DSM-W ISO GEO SERIES
Kubota Spreading equipment – DSM-W ISO GEO SERIES
Medium
Accurate spreading in irregular shaped fields.
The Kubota DSM-W ISO GEOSPREAD Series is the ideal spreader for arable farmers and professional dairy farmers. The GEOSPREAD system does section control with sections of only 2 metres. With a maximum of 14 sections and the possibility to switch sections over the middle, unnecessary overlap is set to an absolute minimum. The 4 load cells and reference sensor on the DSM-W ISO GEOSPREAD spreader are important features as with section control accurate weighing is essential. The total benefit of GEOSPREAD combined with speed related spreading and GEOPOINT headland management can be up to 15%. This can be achieved by saving fertiliser and better yields, because of unnecessary overlap. This Kubota DSM-W ISO GEOSPREAD spreader is ISOBUS compatible and AEF certified. You can operate the spreader in combination with the IsoMatch Tellus, IsoMatch Tellus GO or any other ISOBUS compatible tractor terminal.
Model
Model |
DSM-W ISO GEO SERIES |
Hopper capacity
Hopper capacity |
1,100 - 1,500 - 2,000 - 2,450 |
Working width
Spread width (m) |
10-30 ▲1 |
Output (kg/min) |
10-320 |
Measurements
Filling height (cm) |
108 - 127 - 146 - 165 |
Width (cm) |
220 |
Filling width (cm) |
214 |
Weight
Empty weight (kg) |
480 - 505 - 530 - 555 |
Controls
Manual control |
- |
Hydraulic control |
- |
Comfort Control II |
- |
IsoMatch Tellus GO |
❍ |
IsoMatch Tellus |
❍ |
Equipment (factory fitted)
PTO overload clutch |
● |
Hopper sieves |
● |
Agitator |
- |
Slow rotating agitator |
● |
Fine application |
● |
Granule size box |
● |
Accessories (also loose available) Safety equipment
Warning triangle |
❍ |
Reflector decals |
❍ |
LED light set |
❍ |
Border spreading
Topdressing kit |
- |
Tramline and topdressing kit |
- |
Border spreading plat |
❍ |
Hydraulic border spreading plate |
❍ |
TrimFlow border spreading system |
❍ |
Working width accessories
Kit to spread 20/21m |
- |
Kit to spread 27/28m |
- |
Kit to spread 27/30m |
❍ |
Heavy duty vanes (L=285 mm) |
- |
Lift vanes (L=330 mm) |
- |
Other
Calibration container |
❍ |
Hopper emptying kit |
❍ |
Hopper cover |
❍ |
Ladder |
- |
Side step |
❍ |
Mudguards |
❍ |
Storage frame with parking wheels |
❍ |
1 or 2 d.a. valve (separate closing L/R) |
- |
Hydraulic drive |
- |